30+ Construction Tools List with Images and their Uses

This post (building construction tools list) is written with the intention to make it as a go-to option for all of us.

Sometimes we know the tool but don’t know the name of them in English. We hope we all face this at least once in our life. The below list is a collective effort.

If you know some tools or have images that you think might be helpful for all of us, kindly let us know in the comment section. so we can add it here.

Let’s learn together (Don’t forget to share 🙂 )

Construction tools list with pictures

This list will be updated periodically (periodically)

Construction Tools List and their Uses

This tool is used to digging and to place concrete, cement mortar in head pan
Head PanHead PanThis one is used to transport materials
Masonry trowelMasonry TrowelThis tool is used to place cement mortar
Measurement TapeMeasurement TapeThis is used to measure
Plumb BobPlumb BobThis tool is used to check the vertical alignment of civil works
Wheel BarrowConstruction wheelbarrowThis tool is used to transport cement mortar or any materials. Sometimes it also be used to measure the quantites of materials for site level concrete mixing
Concrete MixerConcrete Mixer on siteThis tool is used to thoroughly mix the concrete at site.
VibratorThis tool is used to vibrate the concrete while pouring. For workability purpose, we all add water to concrete. To avoid that we are using vibrators. There are many types of vibrators
Rubber BootsConcrete work bootsThis one is used to prevent skin from chemical contact
Sand screening machineSand screening machineThis tool is used to sieve sand at site.
GlovesRubber GlovesThis is used to avoid direct contact with dangerous tools, machines or to avoid any direct chemical material contact
Safety Glasssafety glassUsed for safety purpose while drilling, hacking/roughening, grinding
Bump Cutter/ScreedWooden Bump CutterThis tool is used to level fresh concrete surface especially in slab concrete
Wooden Float/wooden rendering floatWooden Rendering FloatsThis tool is used to give a smooth finish to the plastered area
ChiselChiselThis tool is used to remove excess or waste hard concrete
Crow Barcrow barThis tool is used in fomwork to remove nails from boards
Framing SquareFraming SquareThis tool is used in Brickwork, Plastering to check right angle
Framing HammerFraming HammerThis tool is used to drive and remove nails
Line LevelLevel lineThis tool is used to check horizontal level in brickwork, plastering , flooring and tile works
Torpedo LevelTorpedo LevelCombination of line level and framing square
Cordless DrillCordless DrillThis tool is used to make pilot holes, replacing jumper (special type of drill should be used while drilling concrete)
Circular Sawcircular sawThis tool is used to cut woods in shuttering
Hand SawHand SawThis tool is used in wood works and shuttering
Block Plane / Jack PlaneBlack planeThis tool is used in Door and window wood works
Flat Pry BarThis tool is used in shuttering sometimes used to adjust the column formwork to align
Earth RammerEarth RammerThis tool is used to level the ground
Digging barDigging BarThis tool is used to breakup and loosen the compacted / hard surface area
PolishersPolisherThis tool is used to smoothen the surface (wood or marble flooring)
Measuring WheelMeasuring wheelThis tool is used to measure lengths. It varies by length
Measuring BoxMeasuring BoxThis tool is used to measure the cement and sand while site mix
Tile CutterTile CutterThis tool is used to cut the tiles
Putty KnifePutty KnifeThis tool is used in putty finishing to limit the thickness of the putty.
Vacuum BlowerVacuum BlowerThis tools is used to clean the surface area from impurities (In flooring, Slab concrete etc.)

Do you find this helpful? Share it with your friends. 🙂

Happy Learning  🙂